COMGRES 45x45 ETERNA BEIGE MAT 1 PACKAGE=7 PCS=1.42 M2 *

COMGRES 45x45 ETERNA BEIGE MAT 1 PK=7 AD=1.42 M2

In places with a high density of people (mall, shopping mall, hospital, etc.)

All kinds of horizontal floors with constant load (factory, workshop, warehouse)

In places where there is a temperature difference

Terraces, balconies, swimming pools

In cold air and water tanks

EXTERIOR AND FLOORS

The tiles to be laid on the exterior and floor should have a low water absorption value. The adhesive used should be flexible enough to tolerate hot – cold differences. In this respect, we recommend using Cerafix Granite Adhesive Mortar. The joint used should likewise be flexible and have waterproofing properties and should prevent water from penetrating the underside of the tile. Cerafill Silicone Drizzle Filler is a product where you will get the best results in this respect.

MANUFACTURING, FACTORY AND WORKSHOP FLOORS

Tiles to be used in such places are exposed to higher loads, unlike others. In addition, they are required to be more resistant to chemical materials used in the environment.

Unlike other coating materials, ceramic tiles do not require maintenance. It is not affected by the chemicals used in cleaning. Acidic cleaning materials can damage the grout, not the tile.

WATER POOLS

All our products are resistant to swimming pool chemicals. However, wall tiles should not be used in places where there is a risk of freezing. Pools are subjected to pressure in the direction of the surface of the tiles when full and in the opposite direction when empty. Tiles can easily bear this pressure. The important thing here is the adhesive and joint filler. The adhesive and joint used must be able to tolerate these pressure movements. 

Bu kaynak metin hakkında daha fazla bilgiEk çeviri bilgileri için kaynak metin gerekli

Geri bildirim gönder

Yan paneller